header image
Domov arrow Scanning arrow Send error kode SMB
Send error kode SMB Print E-mail
User Rating: / 17
PoorBest 
MFD - Scanning
Written by Marko Lipovec   
20 Okt 2006 ob 09:30 AM

Pri skeniranju na multifunkcijskih napravah (KM-3050, 4050, 5050, 2560, 3060,FS-1118...) na uporabnikov računalnik ( SMB ) ob napakah dobimo obvestilo s številko napake, s katero si lahko pomagamo pri rešitvi težave.

 "Send error" in številka napake.

 

Kaj pomeni posamezna koda (splošno), si lahko pogledate v spodnji tabeli: 

-Ali  pa želite najti opis napake pri skeniranju na elektronsko pošto (klikni)
-Ali  pa želite najti opis napake pri skeniranju na FTP strežnik (klikni)

    1101:The server name of the SMTP server is not set    
    correctly or the host name is incorrect when sending    
    scan data to an FTP server. Use COMMAND CENTER    
    and register the SMTP server name and the host name    
    correctly.


    1102: The login user name is incorrect or the domain    
    name has not been entered. Enter login name, domain    
    name and password correctly.  Navodila (ANG)
   Image

    Skeniranje na Windows strežnik 2012 in novejši: 
    Skeniranje deluje le na vratih 445 (prej: 139)
Image


    1103:The network path name is incorrect or you do not    
    have access to the folder specified. Use COMMAND    
    CENTER and register the path name correctly.
Uradni dokument 


    1104:No recipient address. Enter e-mail address    
    correctly.    


    1105: E-mail - The SMTP protocol setting is turned off.    
    Use COMMAND CENTER and turn on the SMTP    
    protocol setting.    
    Scan to PC (SMB) - SMB setting is turned off. Use    
    COMMAND CENTER and turn on the SMB setting.    
    Scan to PC (FTP) - FTP setting is turned off. Use    
    COMMAND CENTER and turn on the FTP setting.  
Image


    1106: The sender address setting under e-mail: SMTP is    
    not registered. Use COMMAND CENTER and register    
    the sender address. 
Image 


    210#: The network cable is disconnected or the hub that    
    it is connected to is not operating properly. Check the    
    cable connection or the hub.    
    The server name or the host name of the SMTP server is    
    not set correctly. Use COMMAND CENTER and register    
    the SMTP server name and the host name correctly.  


    220#: The network cable has become disconnected    
    during transmission or the hub that it is connected to has    
    stopped operating. Check the cable connection or the    
    hub. 

 

   3101: SMTP Authentication error. Consult with Your network
   administrator to verify that your Login Account    Name and
   Login Paswrod required for SMTP Authentication are correct.
   (Če imate na strežniku za pošiljanje elektronske pošte vključeno
   logiranje)
 Image

 

Last Updated ( 08 Dec 2016 ob 12:57 PM )
<Previous   Next>
Uporabniki na strani
We have 8 guests online
Ankete
Na strani sem našel odgovor na težavo:
  
S Kyocerinimi napravami smo:
  
Novosti

Web FTP vmesnik